Наружные модульные блоки VRF серии V6R (Heat Recovery) DC-inverter

Технология 180-градусного инверторного преобразования

Подробнее о Технология 180-градусного инверторного преобразования

Технология 180° -градусного волнового инверторного преобразования – управляющее напряжение без «импульсных» эффектов (устраняется ступенчатость синусоиды).

По сравнению с стандартным 120° током прямоугольной формы предоставляет следующие преимущества:

Возможность работы при более широком диапазоне питающего напряжения и частоты тока.
Большую энергоэффективность и энергосбережение.
Более мягкий старт, ниже шум и вибрации.
Большие возможности управления.

Алюминиевый теплообменник с гидрофильным покрытием

Подробнее о Алюминиевый теплообменник с гидрофильным покрытием

Aluminium heat exchanger with hydrophilic coating

Повышенная смачиваемость теплообменника, алюминиевые пластины которого имеют специальное покрытие с гидрофильным слоем, обеспечивающим быстрое удаление конденсата с внутреннего блока, что не позволяет быстро образовываться плесени и бактериям, обеспечивая при этом более эффективную работу кондиционера.

Наружный блок дизайна "Бриллиант"

Подробнее о Наружный блок дизайна "Бриллиант"

Дизайнеры Midea не забыли и про внешний вид корпуса наружного блока кондиционера, что само по себе редкость для климатической техники. Наружный блок намного изящнее своих собратьев, имеет грани, как у бриллианта, а внимание к деталям говорит о высоком уровне производства и тщательно продуманной дизайн-концепции.

Мотор DC inverter наружного блока

Подробнее о Мотор DC inverter наружного блока

В наружных блоках для вращения вентилятора используется DC-мотор. Это позволяет значительно снизить уровень шума и энергопотребления. А так же получить несколько позиций скорости вращения вентилятора, в завистимости от потребностей системы.

Теплообменник с повышенной теплоотдачей

Подробнее о Теплообменник с повышенной теплоотдачей

Повышенная теплоотдача. В блоках используются теплообменники с трубками особой конструкции, внутренняя поверхность которых имеет насечки трапециевидной формы "Innergrove cooper", что обеспечивает максимально увеличенную площадь поверхности теплообмена. Благодаря этому теплоотдача повышается на 28%, снижается уровень энергопотребления и, следовательно, увеличивается эффективность работы системы.

Описание

6 базовых наружных блоков, допускается объединять в 2- и 3-модульные сборки (до 168 кВт).
Использование наружных блоков серии VRF V6R позволяет организовать одновременную работу внутренних блоков на обогрев и холод.
Диапазон наружных температур:

– для охлаждения: –15°C~+52°C;

– для обогрева: –25°C~+19°C;

– для подготовки ГВС: –20°C~+43°C.

В этой серии можно применять гидромодули с мощностью 14 кВт, которые используют часть избыточного тепла для нагрева воды ГВС.
Для подключения внутренних блоков используются блоки рекуперации. В этих блоках осуществляется коммутация хладагента, подаваемого и возвращаемого из каждого внутреннего блока с учетом выбранного режима работы и температурных параметров. В блоках MS рекуперации происходит перераспределение потоков фреона, что и позволяет работать внутренним блокам в различных режимах одновременно.
Подключение внутренних блоков к MS блокам – двухтрубное, а подключения MS блоков к общей магистрали системы (к наружному блоку) – трехтрубное.
Такие системы актуально применять, когда в части обслуживаемых помещений есть избыток тепла (холода), в то время, как в других – недостаток (например, помещения ориентированные по разным сторонам света, центры обработки данных и т.п.).

Характеристики

HP			8	10	12
Model name			MV6-R252WV2GN1	MV6-R280WV2GN1	MV6-R335WV2GN1
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	22.4	28	33.5
	Power input	kW	5.25	7.18	8.64
	EER		4.27	3.90	3.88
Heating2(Rated)	Capacity	kW	22.4	28	33.5
	Power input	kW	3.96	5.46	6.57
	COP		5.66	5.13	5.10
Heating2(Max)	Capacity	kW	25	31.5	37.5
	Power input	kW	4.69	7.12	9.48
	COP		5.33	4.43	3.95
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		1
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		1
	Motor output	kW	0.92	0.92	0.92
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	9000	9500	10000
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	8	8	8
Pipe connections4	Liquid pipe	mm	Φ12.7	Φ12.7	Φ12.7
	Low pressure gas pipe	mm	Φ25.4	Φ25.4	Φ25.4
	High pressure gas pipe	mm	Φ19.1	Φ19.1	Φ19.1
Sound pressure level5		dB(A)	58	58	60
Sound power level5		dB(A)	78	78	81
Net dimensions (W×H×D)		mm	990×1635×790	990×1635×790	990×1635×790
Packed dimensions (W×H×D)		mm	1090×1805×860	1090×1805×860	1090×1805×860
Net weight		kg	232	232	232
Gross weight		kg	248	248	248
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those of the unit's stop valve.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			14	16	18	20
Model name			MV6- R400WV2GN1	MV6- R450WV2GN1	MV6- R500WV2GN1	MV6- R560WV2GN1
Power supply		V/N/H	380-415/3/50(60)
Cooling1	Capacity	kW	40	45	50	56
	Power input	kW	9.83	12.00	13.81	17.39
	EER		4.07	3.75	3.62	3.22
Heating2(Rated)	Capacity	kW	40	45	50	56
	Power input	kW	8.26	9.78	11.90	14.77
	COP		4.84	4.60	4.20	3.79
Heating2(Max)	Capacity	kW	45	50	56	63
	Power input	kW	9.78	12.26	14.77	18.33
	COP		4.60	4.08	3.79	3.44
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64	64
Compressor	Type		DC inverter
	Quantity		1
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		2
	Motor output	kW	0.92×2	0.92×2	0.92×2	0.92×2
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	14000	14900	15800	15800
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	10	10	10	10
Pipe connections4	Liquid pipe	mm	Φ15.9	Φ15.9	Φ15.9	Φ15.9
	Low pressure gas	mm	Φ28.6	Φ28.6	Φ28.6	Φ28.6
	High pressure gas	mm	Φ22.2	Φ22.2	Φ22.2	Φ22.2
Sound pressure level5		dB(A)	61	64	65	65
Sound power level5		dB(A)	81	88	88	88
Net dimensions (W×H×D)		mm	1340×1635×825	1340×1635×825	1340×1635×825	1340×1635×825
Packed dimensions (W×H×D)		mm	1405×1805×910	1405×1805×910	1405×1805×910	1405×1805×910
Net weight		kg	300	300	300	300
Gross weight		kg	325	325	325	325
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those of the unit's stop valve.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			22	24	26
Model name			MV6-R615WV2GN1	MV6-R680WV2GN1	MV6-R735WV2GN1
Combination type			10HP+12HP	10HP+14HP	12HP+14HP
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	61.5	68	73.5
	Power input	kW	15.82	17.01	18.46
	EER		3.89	4.00	3.98
Heating2(Rated)	Capacity	kW	61.5	68	73.5
	Power input	kW	12.03	13.72	14.83
	COP		5.11	4.96	4.96
Heating2(Max)	Capacity	kW	69.00	76.50	82.5
	Power input	kW	16.60	16.90	19.27
	COP		4.16	4.53	4.28
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		2
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		2	2	3
	Motor output	kW	0.92×2	0.92×3	0.92×3
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	19500	23500	24000
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	16	18	18
Pipe connections4	Liquid pipe	mm	Φ15.9	Φ15.9	Φ19.1
	Low pressure gas	mm	Φ28.6	Φ34.9	Φ34.9
	High pressure gas	mm	Φ28.6	Φ28.6	Φ28.6
Sound pressure level5		dB(A)	62	63	64
Sound power level5		dB(A)	83	83	84
Net dimensions (W×H×D)		mm	(990×1635×790)×2	990×1635×790+ 1340×1635×825	990×1635×790+ 1340×1635×825
Packed dimensions (W×H×D)		mm	(1090×1805×860)×2	1090×1805×860+ 1405×1805×910	1090×1805×860+ 1405×1805×910
Net weight		kg	232×2	232+300	232+300
Gross weight		kg	248×2	248+325	248+325
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			28	30	32
Model name			MV6-R785WV2GN1	MV6-R835WV2GN1	MV6-R900WV2GN1
Combination type			12HP+16HP	12HP+18HP	16HP+16HP
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	78.5	83.5	90
	Power input	kW	20.64	22.45	24.00
	EER		3.80	3.72	3.75
Heating2(Rated)	Capacity	kW	78.5	83.5	90
	Power input	kW	16.35	18.47	19.57
	COP		4.80	4.52	4.60
Heating2(Max)	Capacity	kW	87.5	93.5	100
	Power input	kW	21.74	24.25	24.52
	COP		4.02	3.86	4.08
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		2
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		3	3	4
	Motor output	kW	0.92×3	0.92×3	0.92×4
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	24900	25800	29800
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	18	18	20
Pipe connections4	Liquid pipe	mm	Φ19.1	Φ19.1	Φ19.1
	Low pressure gas pipe	mm	Φ34.9	Φ34.9	Φ34.9
	High pressure gas pipe	mm	Φ28.6	Φ28.6	Φ28.6
Sound pressure level5		dB(A)	65	66	67
Sound power level5		dB(A)	89	89	91
Net dimensions (W×H×D)		mm	990×1635×790+ 1340×1635×825	990×1635×790+ 1340×1635×825	(1340×1635×825)×2
Packed dimensions (W×H×D)		mm	1090×1805×860+ 1405×1805×910	1090×1805×860+ 1405×1805×910	(1405×1805×910)×2
Net weight		kg	232+300	232+300	300×2
Gross weight		kg	248+325	248+325	325×2
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			34	36	38
Model name			MV6-R950WV2GN1	MV6-R1000WV2GN1	MV6-R1060WV2GN1
Combination type			16HP+18HP	18HP+18HP	18HP+20HP
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	95	100	106
	Power input	kW	25.81	27.62	31.20
	EER		3.68	3.62	3.40
Heating2(Rated)	Capacity	kW	95	100	106
	Power input	kW	21.69	23.81	26.67
	COP		4.38	4.20	3.97
Heating2(Max)	Capacity	kW	106	112	119
	Power input	kW	27.03	29.53	33.09
	COP		3.92	3.79	3.60
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		2
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		4
	Motor output	kW	0.92×4	0.92×4	0.92×4
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	30700	31600	31600
	Drive type		Direct
Refrigerant	Type		R410A
	Factory charge	kg	20	20	20
Pipe connections4	Liquid pipe	mm	Φ19.1	Φ19.1	Φ19.1
	Low pressure gas	mm	Φ34.9	Φ34.9	Φ41.3
	High pressure gas	mm	Φ28.6	Φ28.6	Φ34.9
Sound pressure level5		dB(A)	68	68	68
Sound power level5		dB(A)	91	91	91
Net dimensions (W×H×D)		mm	(1340×1635×825)×2	(1340×1635×825)×2	(1340×1635×825)×2
Packed dimensions (W×H×D)		mm	(1405×1805×910)×2	(1405×1805×910)×2	(1405×1805×910)×2
Net weight		kg	300×2	300×2	300×2
Gross weight		kg	325×2	325×2	325×2
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			40	42	44
Model name			MV6-R1120WV2GN1	MV6-R1185WV2GN1	MV6-R1235WV2GN1
Combination type			20HP+20HP	12HP+14HP+16HP	12HP+16HP+16HP
Power supply		V/N/H	380-415/3/50(60)
Cooling1	Capacity	kW	112	118.5	123.5
	Power input	kW	34.78	30.46	32.64
	EER		3.22	3.89	3.78
Heating2(Rated)	Capacity	kW	112	118.5	123.5
	Power input	kW	29.53	24.62	26.13
	COP		3.79	4.81	4.73
Heating2(Max)	Capacity	kW	126	132.5	137.5
	Power input	kW	36.65	31.53	34.01
	COP		3.44	4.20	4.04
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		2	3	3
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		4	5	5
	Motor output	kW	0.92×4	0.92×5	0.92×5
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	31600	38900	39800
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	20	28	28
Pipe connections4	Liquid pipe	mm	Φ19.1	Φ19.1	Φ19.1
	Low pressure gas	mm	Φ41.3	Φ41.3	Φ41.3
	High pressure gas	mm	Φ34.9	Φ34.9	Φ34.9
Sound pressure level5		dB(A)	68	67	68
Sound power level5		dB(A)	91	89	91
Net dimensions (W×H×D)		mm	(1340×1635×825)×2	990×1635×790+ (1340×1635×825)×2	990×1635×790+ (1340×1635×825)×2
Packed dimensions (W×H×D)		mm	(1405×1805×910)×2	1090×1805×860+ (1405×1805×910)×2	1090×1805×860+ (1405×1805×910)×2
Net weight		kg	300×2	232+300×2	232+300×2
Gross weight		kg	325×2	248+325×2	248+325×2
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			46	48	50
Model name			MV6-R1300WV2GN1	MV6-R1350WV2GN1	MV6-R1400WV2GN1
Combination type			14HP+16HP+16HP	16HP+16HP+16HP	16HP+16HP+18HP
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	130	135	140
	Power input	kW	33.83	36.00	37.81
	EER		3.84	3.75	3.70
Heating2(Rated)	Capacity	kW	130	135	140
	Power input	kW	27.83	29.35	31.47
	COP		4.67	4.60	4.45
Heating2(Max)	Capacity	kW	145	150	156
	Power input	kW	34.31	36.79	39.29
	COP		4.23	4.08	3.97
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		3
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		6	6	6
	Motor output	kW	0.92×6	0.92×6	0.92×6
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	43800	44700	45600
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	30	30	30
Pipe connections4	Liquid pipe	mm	Φ19.1	Φ19.1	Φ19.1
	Low pressure gas pipe	mm	Φ41.3	Φ41.3	Φ41.3
	High pressure gas	mm	Φ34.9	Φ34.9	Φ34.9
Sound pressure level5		dB(A)	68	69	69
Sound power level5		dB(A)	91	93	93
Net dimensions (W×H×D)		mm	(1340×1635×825)×3	(1340×1635×825)×3	(1340×1635×825)×3
Packed dimensions (W×H×D)		mm	(1405×1805×910)×3	(1405×1805×910)×3	(1405×1805×910)×3
Net weight		kg	300×3	300×3	300×3
Gross weight		kg	325×3	325×3	325×3
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			52	54	56
Model name			MV6-R1450WV2GN1	MV6-R1500WV2GN1	MV6-R1560WV2GN1
Combination type			16HP+18HP+18HP	18HP+18HP+18HP	18HP+18HP+20HP
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	145	150	156
	Power input	kW	39.62	41.44	45.01
	EER		3.66	3.62	3.47
Heating2(Rated)	Capacity	kW	145	150	156
	Power input	kW	33.59	35.71	38.58
	COP		4.32	4.20	4.04
Heating2(Max)	Capacity	kW	162	168	175
	Power input	kW	41.80	44.30	47.86
	COP		3.97	3.88	3.79
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity3
Connected indoor unit	Maximum quantity		64	64	64
Compressor	Type		DC inverter
	Quantity		3
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		6	6	6
	Motor output	kW	0.92×6	0.92×6	0.92×6
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	46500	47400	47400
	Drive type		Direct
Refrigerant	Type		R410A
Refrigerant	Factory charge	kg	30	30	30
Pipe connections4	Liquid pipe	mm	Φ19.1	Φ19.1	Φ19.1
	Low pressure gas	mm	Φ41.3	Φ41.3	Φ41.3
	High pressure gas	mm	Φ34.9	Φ34.9	Φ34.9
Sound pressure level5		dB(A)	69	70	70
Sound power level5		dB(A)	93	93	93
Net dimensions (W×H×D)		mm	(1340×1635×825)×3	(1340×1635×825)×3	(1340×1635×825)×3
Packed dimensions (W×H×D)		mm	(1405×1805×910)×3	(1405×1805×910)×3	(1405×1805×910)×3
Net weight		kg	300×3	300×3	300×3
Gross weight		kg	325×3	325×3	325×3
Ambient temp. operation range	Cooling6	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

HP			58	60
Model name			MV6-R1620WV2GN1	MV6-R1680WV2GN1
Combination type			18HP+20HP+20HP	20HP+20HP+20HP
Power supply		V/N/Hz	380-415/3/50(60)
Cooling1	Capacity	kW	162	168
	Power input	kW	48.59	52.17
	EER		3.33	3.22
Heating2(Rated)	Capacity	kW	162	168
	Power input	kW	41.44	44.30
	COP		3.91	3.79
Heating2(Max)	Capacity	kW	182	189
	Power input	kW	51.42	54.98
	COP		3.54	3.44
Connected indoor unit	Total capacity		50-200% of outdoor unit capacity
	Maximum quantity		64	64
Compressor	Type		DC inverter
	Quantity		3
	Oil type		FV68H
	Start-up method		Soft start
Fan	Type		Propeller
	Motor type		DC
	Quantity		6	6
	Motor output	kW	0.92×6	0.92×6
	Static pressure	Pa	0,20,40,60,80(Selectable)
	Air flow rate	m3/h	47400	47400
	Drive type		Direct
Refrigerant	Type		R410A
	Factory charge	kg	30	30
Pipe connections3	Liquid pipe	mm	Φ19.1	Φ19.1
	Low pressure gas pipe	mm	Φ41.3	Φ41.3
	High pressure gas pipe	mm	Φ34.9	Φ34.9
Sound pressure level4		dB(A)	70	70
Sound power level4		dB(A)	93	93
Net dimensions (W×H×D)		mm	(1340×1635×825)×3	(1340×1635×825)×3
Packed dimensions (W×H×D)		mm	(1405×1805×910)×3	(1405×1805×910)×3
Net weight		kg	300×3	300×3
Gross weight		kg	325×3	325×3
Ambient temp. operation range	Cooling	oC(DB)	-15 ~ 52
	Heating	oC(WB)	-25 ~ 19
	Domestic hot water	oC(DB)	-20 ~ 43
Notes:
1. Indoor air temperature 27°C DB, 19°C WB; outdoor air temperature 35°C DB; equivalent refrigerant piping length 7.5m with zero level difference.
2. Indoor air temperature 20°C DB; outdoor air temperature 7°C DB, 6°C WB; equivalent refrigerant piping length 7.5m with zero level difference.
3. Refer to table 1-5.1: Indoor and outdoor unit combination ratio limitations in Part 1.
4. Diameters given are those for the pipe connecting the outdoor unit combination to the first indoor branch joint for systems with total equivalent liquid piping lengths of less than 90m. For systems with total equivalent liquid piping lengths of 90m or longer, please refer to Part 3 “System Design and Installation” for connection piping diameters.
5. Sound pressure level is measured at a position 1m in front of the unit and 1.3m above the floor in a semi-anechoic chamber.
6. -15°C to -5°C low temperature cooling operation is just available for MS01.

Model name			MS01/N1-D1	MS04/N1-D	MS06/N1-D
Power supply		V/ph/Hz	220-240/1/50(60)
Max. number of indoor unit groups			1	4	6
Max. number of units per group			8	5	5
Max. number of downstream indoor units			8	20	30
Max. capacity of each group of indoor units		kW	32	16	16
Total capacity of downstream indoor units		kW	32	49	63
Pipe connections to ODU	Liquid pipe	mm	∅9.53/∅12.7	∅9.53/∅12.7/∅15.9/∅19.05	∅9.53/∅12.7/∅15.9/∅19.05
	Low pressure gas pipe	mm	∅15.9/∅19.1/∅22.2	∅19.1/∅22.2/∅28.6	∅19.1/∅22.2/∅28.6
	High pressure gas pipe	mm	∅12.7/∅15.9/∅19.1	∅15.9/∅19.1/∅22.2/∅28.6	∅15.9/∅19.1/∅22.2/∅28.6
Pipe connections to IDU	Liquid pipe	mm	∅6.35/∅9.53	∅6.35/∅9.53	∅6.35/∅9.53
Pipe connections to IDU	Gas pipe	mm	∅12.7/∅15.9	∅12.7/∅15.9	∅12.7/∅15.9
Sound pressure level2		dB(A)	40	44	45
Sound power level2		dB(A)	60	63	65
Net dimensions (W×H×D)		mm	440×195×296	668×250×574	668×250×574
Packed dimensions (W×H×D)		mm	740×275×405	1020×390×850	1020×390×850
Net weight		kg	10.5	33	36
Gross weight		kg	14	58	61
Notes:
1. MS01 is for low temperature cooling operation and leakage detection.
2. The sound level is measured at a position 1m below the MS box in a semi-anechoic chamber whilst the MS box is switching mode. MS box should not be installed in locations with low-noise requirements.

Model name			MS08/N1-D	MS10/N1-D	MS12/N1-D
Power supply		V/ph/Hz	220-240/1/50(60)
Max. number of indoor unit groups			8	10	12
Max. number of units per group			5	5	5
Max. number of downstream indoor units			40	47	47
Max. capacity of each group of indoor units		kW	16	16	16
Total capacity of downstream indoor units		kW	85	85	85
Pipe connections to ODU	Liquid pipe	mm	∅12.7/∅15.9/∅19.1/∅22.2	∅12.7/∅15.9/∅19.1/∅22.2	∅12.7/∅15.9/∅19.1/∅22.2
	Low pressure gas pipe	mm	∅22.2/∅28.6/∅34.9	∅22.2/∅28.6/∅34.9	∅22.2/∅28.6/∅34.9
	High pressure gas pipe	mm	∅19.1/∅22.2/∅28.6	∅19.1/∅22.2/∅28.6	∅19.1/∅22.2/∅28.6
Pipe connections to IDU	Liquid pipe	mm	∅6.35/∅9.53	∅6.35/∅9.53	∅6.35/∅9.53
Pipe connections to IDU	Gas pipe	mm	∅12.7/∅15.9	∅12.7/∅15.9	∅12.7/∅15.9
Sound pressure level1		dB(A)	47	47	47
Sound power level1		dB(A)	65	65	65
Net dimensions (W×H×D)		mm	974×250×574	974×250×574	974×250×574
Packed dimensions (W×H×D)		mm	1320×390×850	1320×390×850	1320×390×850
Net weight		kg	48	51	54
Gross weight		kg	79	82	85
Notes:
1. The sound level is measured at a position 1m below the MS box in a semi-anechoic chamber whilst the MS box is switching mode. MS box should not be installed in locations with low-noise requirements.

Инструкции

Инженерные данные для VRF V6R (3-х трубной) с рекуперацией тепла

Загрузить
13.35 МБ

Основная навигация

Midea "Наружные модульные блоки VRF серии V6R (Heat Recovery) DC-inverter"

Рекомендованная цена

Технология 180-градусного инверторного преобразования

Алюминиевый теплообменник с гидрофильным покрытием

Наружный блок дизайна "Бриллиант"

Мотор DC inverter наружного блока

Теплообменник с повышенной теплоотдачей