Fan coils Controllers and Electronic boards

For make control under the fan-coil units, in which the control system is not installed by the factory - and that, often, duct type and ceiling-floor series, offered range of wired controllers with built-in temperature sensor, which is often referred to as thermostats. By type of control panel can be divided into mechanical and electronic. For all types of fan coils can organize group control, but set an external electronic equipment, and the factory is dismantled.

For repair air-conditioners, not metter producer factory, we offer some type of infrared remote controllers and electronics kits, ready for install into any not-inverter split AC.

Series:

Features of THP-1001ALW TUYA thermostat

  • WiFi & Modbus
  • 0.5°C - temperature maintenance accuracy
  • Humidity sensor
  • Data memory when power is off (auto-restart)
  • Programmable scheduler 7 days for six cycles provides maximum comfort and savings
  • Interacts with Amazon Echo, Google Home.

Thermostats of the THP-1000ALN (W) series are used to control two pipe fan coils. It can regulate the state of the electric 2-way (3-way) valve and fan speed, which allows creating a comfortable temperature in the room.

Model THP-1000ALW - white body color, has the ability to connect to a home Wi-Fi network.

Model THP-1000ALN - black color of the case.

Electronic, wall-mounted touch thermostat TP528 for duct, floor-to-ceiling fan coil units (without board from the factory).
• Easy and fast installation,
• Large LCD display with backlight,
• Modern design with "thin frame",
• 3 fan speeds (min./medium/max.),
• 2 modes of operation (heat/cold),
• Valve opening control (on-off relay signal 220V),
• Without auto-restart,
• Weekly programming 5+1+1,
• Possibility of temperature calibration,
• Temperature control of the internal sensor,
• Residential, commercial use,

Thermostats of the TP201AL series are used to control two pipe fan coils. It can regulate the state of the electric 2-way (3-way) valve and fan speed, which allows creating a comfortable temperature in the room.

  • Electronic, wall,
  • Touch LCD screen, with backlight,
  • 2 modes of operation (heat / cold),
  • Valve opening control (relay signal 220V),
  • Installation in a socket outlet Ø=60mm.

Options: connection to the ModBUS bus (R-T-U contacts) + weekly timer.

The Midea KJR-29B(1)/BK-E controller is designed for intelligent and efficient control of equipment.

Monitors and controls cassette-type fan coils and the FCUKZ-01 module - on/off, selection of operating mode, temperature, fan speed.

Advanced settings of the device — setting of night silent mode, setting of 3 (7) fan speeds, turning off the sound signal, setting the address of the indoor unit, the function of checking the parameters of the indoor unit, the function of checking the error code.

For more details, see the "Characteristics" tab and the User's Manual.

Electronic wall thermostat, with buttons, LCD screen.
Designed for fan coil units supplied without a control board (from the factory), with an RS-485 port for integration into the central building management network (to the master - BMS device).
Allows you to select operating modes, fan speed, controls the valve to open (relay signal 220V). It has an auto-restart after a power failure.
The size of the housing allows for surface mounting in a box 86x86 mm.

The KJR-07B wired remote control is designed to control cassette fan coil units, it is connected to the fan coil photodetector, and uses data from the fan coil temperature sensor.

Is used for:

  • ON / OFF,
  • operating mode selection (heat/cold/ventilation),
  • fan control - 3 speeds,
  • temperature settings.

The wired electronic control panel KJRP-86I/MFKS-E, designed for installation in the mounting hole prepared in the housing of Midea MKH2 fan coil units (and only them), is connected to the fan coil motor, uses data from the built-in or remote fan coil temperature sensor.

Is used for:

  • ON / OFF,
  • operating mode selection (heat/cold/ventilation),
  • fan control - 3 speeds,
  • temperature settings.

The wired remote control KJR-15 B/E(P) is built into the body of floor-ceiling fan coils MKH4/MKH5 (it can be installed in the seat on the body ONLY IN FLOOR INSTALLATION OF THE FAN COIL).

It is used for:

  •      ON / OFF,
  •      operating mode selection (heat / cold),
  •      fan speed changes (connects to the fan coil fan terminals),
  •      temperature changes (has an air temperature sensor).

Thermostat HD-P201, for fan coils and air-conditioners without control board.

It allows you to:

  • turn on and off the fan coil.
  • temeraturu adjusted in cooling mode.
  • temeraturu adjusted in heating mode.
  • switch the 3-speed fan.
  • manage 2 or 3-way valve.

The FCUKZ-01 module is designed for remote electronic control of the fan coil (for the 1st fan coil in the group) and allows you to connect to the central Midea CSM-30 group control panel.

The module is delivered in a separate case with a control board, terminal blocks, a photo receiver and a control unit.

Can be used to control floor-ceiling or channel-type fan coils, supplied without board and MPC.

WARNING! Delivered to order.

Addressing adapter NIM-01 is intended for centralized control of the fan coil through the XYE connection (only available for unidirectional MKC AC cassettes)

LEDs on the case display:

  • - work indication,
  • - communication indication,
  • - Fault indication.