Archive of fan coils (models of previous years)

Reduced size, less space for installation, easy maintenance achieved through the use of 2-row heat exchanger with smaller dimensions of the motor, which models MKT 2 provides a static pressure of 12 Pa.
In models with an index (E) of installed electrical heating elements 0.5-2.2 kW (depending on model).

Features of this series:

Features of the series:

• Advanced perimeter condensate drain pan (under the heat exchanger and the connection ports);
• Plenum return air side, and the air filter are optional;The maximum water temperature of 70°C;
• Static pressure 12 Pa (Index G labeling);
• Easy replacement of the heat exchanger connection - permutation in the housing;
• Remote Control - option.

Fancoil unit - a device that is installed in the premises of a wide variety of assignments. Its main function is to maintain the desired temperature. Fan coils are generally composed of a heat exchanger with a fan, a filter, a remote control (thermostat). On request they can be supplemented with a variety of accessories.

Features of this series:

Fancoil unit - a device that is installed in the premises of a wide variety of appointments. Its main function is to maintain the desired temperature. Fan coils are generally composed of a heat exchanger with a fan, a filter, a remote control (thermostat). On request they can be supplemented with a variety of accessories.

Features of this series:

They are used in hydraulic systems, central air conditioning and heating with separate sources of heat transfer medium or inability to feed one type of coolant in the cooling network and heating network (options: chiller + boiler + heat pump central heating, etc.).

The design of the blocks is similar to the fan coil units for 2-pipe systems, only a portion of the heat exchanger battery is separated (2/3 - the cold, 1/3 - heat) and displayed on separate ports.

 Features of the blocks in this series:

Product features:

• Highly reliable quality

Whole stainless steel or metal with special coating and anti-rust treatment. High-class main component, dustproof
and waterproof.

• Good performance, stable and reliable

Two motors, one is backup to ensure the system uninterrupted operation.

• Available temperature control from -30°C to + 30°C
• Accuracy: ± 0.5°C at + 14°C
• Rated voltage 110-250 In
• Contact resistance ≤ 50mΩ
• Dielectric strength AC1500V / 1 min.
• The length of the capillary tube - 1m
• Use: fan coil units, air-conditioning, refrigerated cabinets, showcases, refrigerators, freezers.

Features of the blocks in this series:

• Built-in 3-way valve;
• The evaporator uses a special plate structure, which increases the efficiency of heat exchange;
• IR remote control in the package;
• The front panel is convenient for cleaning and access to internal components;
• 2 directions for connection of water pipelines (right and left).

Touch screen LED display Programmable room thermostat HD-Y388 for fan coils

Switching mode: Touch screen
Display: LED display
Application: Heating cable, electric heating film, carbon crystal board, water heating.
Controlling mode: Double temperature display
Sensing Element: NTC sensor
Load: 20A/30A/60A
Power Supply: 220VAC 10%  50/60HZ
Accuracy: ±1 Centigrade
Housing: Anti-flammable PC
Storage temperature: -20~+50 Centigrade
Dimension: 90x86x19(mm), 82x92x32(mm)
Connection wire diameter: 2.5mm2(20A), 4mm2 (30A/60A)

• Temperature range: 5 to 35 ° C;
• Reading accuracy: ± 1 ° C;
• Switch rated power: <3A;
• The sensing element: NTC;
• Display: LCD;
• Voltage: 220 V ± 15% 50-60 Hz;
• Dimensions: 86 x 86 x 13.5 mm;
• Body: flame retardant ABS.

Electronic wall mounted wired remote thermostat KJR-21B / D for the fan coil units, designed to regulate the room temperature by means of:

• ON / OFF 2 (3) way valve.
• on / off additional electric heater.
• change 4 fan speeds fan coil.

There are hours and the display backlight in blue.

The HL3920 series thermostat is a wireless thermostat to control 2-pipe or 4-pipe fan coil unit and controller  that can be placed  anywhere at your home, office.

The HL3920 thermostat pack consists of a room thermostat and a relay box. No wiring to the room unit is required. The installer only needs to wire the relay box to the controlled device (e.g. fan coil unit) and mount the room unit in a suitable location where RF communication is reliable. The A3920 thermostat uses reliable RF communication technology in the 433MHz band.