MTIU | Midea

Suggested retail price

15,170- ... 20,910-hrv.

Technology

Aluminium heat exchanger with hydrophilic coating

Read more about Aluminium heat exchanger with hydrophilic coating

Improved wettability of the heat exchanger aluminum plates which have a special coating with a hydrophilic layer, ensuring rapid removal of condensate from the indoor unit that does not allow to quickly form of mold and bacteria, providing a more efficient operation of the air conditioner.

Dry Mode

Read more about Dry Mode

Dry mode automatically selects cooling, based on the difference between fixed and temparaturoy actual room temperature. The temperature is regulated while reducing humidity repeated switching on and off of the cooling and ventilation only. when the dry mode on the remote control shows "Drop"

Flexible Air Intake Ways

Read more about Flexible Air Intake Ways

Air inlet from back standard and from bottom optional. The size of the plate from bottom and flange from back is the same, it’s easy for installer to change the air inlet from back to bottom.

Multi-Bend Heat Exchanger

Read more about Multi-Bend Heat Exchanger

Increased heat. This unit uses the heat exchangers with tubes of a special design, the inner surface of which has trapezoidal notches "Innergrove cooper", which provides maximum heat transfer surface area increased. Due to this heat increases by 28%, reduced power consumption, and hence increases the efficiency of the system.

Night Mode

Read more about Night Mode

Mode is activated with the remote control and provides a comfortable environment for a peaceful and deep sleep during the 7-hour cycle with a temperature change of reference values, as well as setting the minimum noise level and economical energy consumption. After that, the temperature returns to the originally specified value.

Description

The indoor unit of the channel type is protected by the possibility of a prefabricated installation for an instant stele and a re-installation through the ducts. These systems are often stagnated in places where design is important, you cannot see fragments of the unit itself in rooms, and only the resolution of the unit can be diffuser if it is in place for a look. Blocks of the channel type with a middle vise can be switched to air ducts (channels) with a lift of 3-7 m. As a rule, there is also a solution for one on top of the cottage or shop hall. The channel internal blocks are secured by the remote control ІК ДУ in the delivery set, the remote control can be changed optionally.

Specifications

Indoor model			MTIU-07FNXD0	MTIU-09FNXD0	MTIU-12HWFNX	MTIU-18HWFNX	MTIU-24HWFNX
Power supply (Indoor )		V- Ph-Hz	220~240-1-50	220~240-1-50	220~240-1-50	220~240-1-50	220~240-1-50
Cooling	Capacity	Btu/h	7000	9000	12000	18000	24000
	Input	W	170	180	185	200	210
	Current	A	1	1.1	1.1	1.3	1.35
Heating	Capacity	Btu/h	8000	10000	13000	19000	25000
	Input	W	170	180	185	200	210
	current	A	1	1.1	1.1	1.3	1.35
Indoor air flow (Hi/Mi/Lo)		m3/h	500/340/230	500/340/230	600/480/300	880/650/350	1229/1035/825.1
ESP	Rated	Pa	25	25	25	25	25
ESP	Range	Pa	0-40	0-40	0-60	0-100	0-160
Indoor sound pressure level (Hi)		dB(A)	40/34.5/27.5	40/34.5/27.5	40/34.5/27.5	41.5/38/33	42/39/36
Indoor sound power level (Hi)		dB(A)	58	58	59	59	61
Indoor unit	Dimension(WDH)	mm	700x506x200	700x506x200	700x506x200	880x674x210	1100x774x249
	Packing (WDH)	mm	860x540x275	860x540x275	860x540x275	1070x725x280	1305x805x315
	Net/Gross weight	Kg	18/22	18/22	18/22	24.3/29.6	32.3/39.1
Design pressure		MPa	4.3/1.7	4.3/1.7	4.3/1.7	4.3/1.7	4.2/1.5
Drainage water pipe dia		mm	ODΦ25	ODΦ25	ODΦ25	ODΦ25	ODΦ25mm
Refrigerant piping	Liquid side/ Gas side	mm(inch)	Φ6.35/Φ9.52(1/4"/3/8")	Φ6.35/Φ9.52(1/4"/3/8")	Φ6.35/Φ9.52(1/4"/3/8")	Φ6.35/Φ12.7(1/4"/1/2")	9.52mm(3/8in)/15.9mm(5/8in)
Controller			Wired Control	Wired Control	Wired Control	Wired control	Wired control
Room temp		°C	17~30	17~30	17~30	17~30	17~30
Operation temp	Cooling	°C	17~32	17~32	17~32	17~32	17~32
Operation temp	Heating	°C	0~30	0~30	0~30	0~30	0~30